chevron icon chevron icon chevron icon

Pressure

In this article, we are going to learn about Pressure. We will learn the formula of calculating pressure. We will also study about pressure in liquids and also derive the formula for calculating the pressure in liquids.

 

Introducing Pressure

Pressure is defined as the force acting per unit area.

\(\displaystyle{p =\frac {\;F\;}{\;A\;}}\)

Where p is the pressure in Pascal ( Pa ) Or Newton per square metre ( Nm-2 );

F is the force applied in Newton ( );

A is the area in contact in square metre ( m2 ).

 

Is pressure a scalar or a vector?

Pressure is a scalar quantity. It only has magnitude but no direction.

 

Why study pressure?

Pressure is used when comparing the effect of forces acting on a surface.



 

The two cylinders in the image have the same weight but different base areas.

When we put these two cylinders on a hard surface like a table, they will exert the same force on the table.

But since the base area is different, the pressure exerted by the two cylinders will be different.

What would happen if these two cylinders are put on soft muddy ground?

We see that the thinner cylinder will sink deeper into the mud but the broader cylinder will not go that deep into the mud.

Why is it so?

We know that the formula for pressure is:


\(\displaystyle{p =\frac {\;F\;}{\;A\;}}\)
 

Since the weight of both cylinders is the same, they will exert the same F (force) on the mud. Hence, the value of F will be the same.

The base area A is different in both cases. From the above equation, we know that the pressure applied by the object is inversely proportional to the contact area.

Thus, the thinner cylinder has a lesser contact area and thus applies more pressure on the soft mud. Hence, it sinks much deeper into the mud. The cylinder having a broader contact area applies lesser pressure on the soft mud. Thus, it sinks less.

Pressure allows us to know whether a surface is able to take the load placed on it.

 

Practice Questions

Question 1: 

Determine the contact area of a book resting on a table, if the weight of the book is 8.00 N and the pressure exerted on the table by the book is 50.0 Pa.

  1. 6.25 cm2
  2. 160 cm2
  3. 400 cm2
  4. 1600 cm2 

Solution:

Option D is the correct answer

Explanation:

By using,

p = \(\frac {\;F\;}{\;A\;}\)

50.0 = \(\frac {\;8.00\;}{\;A\;}\)

A  = \(\frac {\;8\;}{\;50\;}\) 

    = 0.16 m²

Because,

         1 m² = 10⁴ cm²

    0.16 m² = 0.16 × 10⁴ 

                 = 1600 cm²

 

Question 2: 

A woman has a weight of 520 N. She steps on her enemy’s foot with the left heel of her stiletto heels using her entire body weight. Given that the area of the heel is 1 cm², what is the pressure exerted on her enemy’s leg?

  1. 260 kPa
  2. 520 kPa
  3. 2.6 MPa
  4. 5.2 MPa

 

Solution: 

Option D is the correct answer

Explanation:

By using,

 p = \(\frac {\;F\;}{\;A\;}\)

And 

        1 m² = 10⁻⁴ cm²

             p =  \(\frac {\;520\;}{\;10^{-4}\;}\)

                = 5.2 M Pa

 

Question 3:

A block of metal of dimensions 0.2 m × 0.3 m × 0.4 m rests on the floor as shown in the figure below.

 

If the mass of the block is 120 kg, what is the highest pressure that the block can exert on the floor?

  1. 2000 Nm-2 
  2. 10000 Nm-2 
  3. 20000 Nm-2 
  4. 40000 Nm-2 

 

Solution:

Option C is the correct answer

Explanation:

  p = \(\frac {\;F\;}{\;A\;}\)

And,

F = W 

   = mg

   = 120 × 10 

   = 1200 N

We want to find the highest pressure. Hence, the area has to be the smallest. Thus, we choose the two shortest sides of the box.

p = \(\frac {\;1200\;}{\;0.2\; \times \;0.3\;}\)

   = 20, 000 N m²

Question 4:

A cement mixer is placed on a large flat board to prevent it from sinking into soft ground.

How does the board prevent the mixer from sinking?

  1. The increased area decreases the pressure on the ground.
  2. The increased area increases the pressure on the ground.
  3. The large area decreases the weight on the ground.
  4. The large area increases the weight on the ground.

Solution:

Option A is the correct answer

Explanation:

As the area of the surface increases, and the weight of the cement mixer remains the same, the pressure on the ground decreases. 

Question 5:

A dune buggy has a sail of area 6 m². Wind blowing the sail creates an excess pressure of 5    10² Pa on it.

What is the acceleration of the buggy, in m s⁻², if the mass of the buggy including the driver measures to be 120 kg?

  1. 2.5
  2. 5.0
  3. 25
  4. 50

Solution:  

Option C is the correct answer

Explanation:

By using,

 p = \(\frac {\;F\;}{\;A\;}\)

           \(\frac {\;F\;}{\;6\;}\) = 5 × 10²

             F = 5 × 10² × 6 

                = 3000 N

Now,

F = m × a

Where,

           m = 120 kg

So,

      3000 = 120 × a 

            a = 3000 ÷ 120 

               = 25 m s⁻²

Pressure in Liquids

Below is a rectangular tank completely filled with a liquid of density. The tank has a base area of A and height h

 

 

Volume of liquid in the tank V = A h 

Mass of the liquid m = ρ V

Weight of the liquid W = m g

Substituting the value of m 

W = ( ρV) g

Substituting the value of V

W = ρ (A h) g

Pressure p at the bottom of the tank = \(\frac {\;F\;}{\;A\;}\)

F is actually the weight of the liquid W. Substituting W  in the equation.

Pressure p at the bottom of the tank = \(\frac {\;W\;}{\;A\;}\) 

                                                          = \(\frac {\;ρ (A h) g\;}{\;A\;}\) 

                                                          = ρ g h

Pressure p at the bottom of the tank = ρ g h

What does the formula (p = ρ g h) imply about pressure in liquids?

The diagram below shows a water tank with holes at three different heights. Water at the bottom hole is observed to move the furthest distance.

From the above diagram, we observe that as we go deeper down in the tank, the weight of the liquid above us increases and thus the pressure acting on us increases.

The larger the height (or depth), h, of the liquid, the larger the liquid pressure.

Let us consider another situation.

We have two containers of the same height but different base areas filled with similar liquids. We poke a hole in the two containers at the same height.

We can see from the above diagram that the water spurts out from the two containers at the same horizontal distance from the base of the container.

Similar liquids of the same height (depth) exert the same pressure, regardless of base area.

 

p = ρ g h

 

The pressure of the liquid is independent of the base area of the container.

Question 6: 

An oil barrel of height 1.50 m, radius 55 cm is filled with oil of density 932 kg m⁻³. What is the pressure, due to the oil alone, on the base of the tank? (Take g to be 10 N kg⁻¹.)

  1. 9810 Pa
  2. 13300 Pa
  3. 14000 Pa
  4. 513000 Pa

Solution:  

Option C is the correct answer

Explanation:

By using,

p = ρ g h

  p = 932 × 10 × 1.5 

   = 13980 Pa 

 ≈ 14000 Pa (rounded off)

Question 7:

Arrange the positions in the container in order of increasing pressure.

  1. A, D, B, E, C
  2. A, B, D, C, E
  3. B, A, D, C, E
  4. A, D, E, B, C

Solution:

Option A is the correct answer

Explanation:

The larger the depth, the larger the amount of liquid above and thus the larger is the pressure.

Question 8:

Liquid X has a density of 1010 kg m⁻³. Liquid Y has a density of 950 kg m⁻³. The liquids are poured into tubes as shown.

 

Which tube exerts the least pressure on its base?

  1. A
  2. B
  3. C
  4. D

Solution:  

Option D is the correct answer

Explanation:

By using,

p = ρ g h

From this formula, we can see that p is directly proportional to the density of the liquid. Thus, higher the density of the liquid, the higher the pressure.

The greater the depth of the liquid in the tube, the greater the pressure exerted at the base of the tube. The pressure of liquid is independent of the base area. Thus, the cross-sectional area of the tube does not matter.

Comparing tubes B and D, we observe that the height of the liquid in tube D is lower. Thus, it will exert less pressure on the base. 

Question 9: 

Water of density 1000 kg m⁻³ fills up to 30 cm in a container. The base of the container is broken accidentally and water starts to leak from a tiny hole area of 1.0 mm². To prevent water from leaking, a sticky tape is used to cover the tiny hole. Determine the minimum force that the tape must be able to withstand.

  1. 0.003 N
  2. 0.3 N
  3. 30 N
  4. 3000 N

Solution:  

Option A is the correct answer

Explanation:

Here,

ρ = 1000 kg m⁻³

h = 30 cm 

   = 0.3 m

  g = 10 N kg⁻¹

By using,

p = ρ g h

   = 1000 × 10 × 0.3 

   = 3000 Pa

Also,

Pressure = \(\frac {\;Force\;}{\;Area\;}\)

So,

Force = Pressure × Area

Where,

Area of the hole = 1.0 mm²

Because,

1 mm² = 10⁻⁶ m²

Therefore,

Force = 3000 × 10⁻⁶ 

          = 0.003 N

The tape must be able to withstand the force of 0.003 N

Conclusion

In this article, we learnt about the Introduction to Pressure and Pressure in liquids as per the Secondary 3 Physics syllabus. 

 

Continue Learning
Light - Reflection Units and Measurements
Kinematics - Distance & Displacement Dynamics
Mass, Weight & Density Thermal Properties Of Matter
Moments Temperature
Kinetic Model of Matter Waves
Work, Power & Energy Pressure
Transfer Of Thermal Energy
Resources - Academic Topics
icon expand icon collapse Primary
icon expand icon collapse Secondary
icon expand icon collapse
Book a free product demo
Suitable for primary & secondary
select dropdown icon
Our Education Consultants will get in touch with you to offer your child a complimentary Strength Analysis.
Book a free product demo
Suitable for primary & secondary
icon close
Default Wrong Input
Get instant access to
our educational content
Start practising and learning.
No Error
arrow down arrow down
No Error
*By submitting your phone number, we have
your permission to contact you regarding
Geniebook. See our Privacy Policy.
Success
Let’s get learning!
Download our educational
resources now.
icon close
Error
Error
Oops! Something went wrong.
Let’s refresh the page!
Claim your free demo today!
Geniebook CTA Illustration Geniebook CTA Illustration
Turn your child's weaknesses into strengths
Geniebook CTA Illustration Geniebook CTA Illustration
close icon
close icon
Turn your child's weaknesses into strengths
Trusted by over 220,000 students.
 
Arrow Down Arrow Down
 
Error
Oops! Something went wrong.
Let’s refresh the page!
Error
Oops! Something went wrong.
Let’s refresh the page!
We got your request!
A consultant will be contacting you in the next few days to schedule a demo!
*By submitting your phone number, we have your permission to contact you regarding Geniebook. See our Privacy Policy.